Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Air Duct Cleaning Company in Ferguson, MO
Air duct repair in Ferguson usually starts with the same discovery: a house built between 1900 and 1960 with sheet-metal ducts sized for a gravity furnace, now pushed by a modern blower it was never designed for. Those runs leak at the seams, whistle at the boots, and collect soot the household can’t see until someone opens a register. We work with professional-grade Rotobrush and Nikro extraction systems and Abatement Technologies containment equipment, so we can clean a system properly and repair what’s broken on the same visit. If you’ve been told your ducts need work and want a straight answer, call (877) 349-6189. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Ferguson Homes Are Different
The core of Ferguson’s 63135 housing went up between 1900 and 1960, and that single fact shapes every duct job here. A lot of these homes still carry the original galvanized sheet-metal runs from floor-furnace days or from early forced-air conversions. Those ducts were sized for gentle gravity heat, not for the pressure a modern blower puts behind them. The result is a system that leaks at every joint and holds decades of soot in places a vacuum can reach only after the right prep.
The climate works on them too. St. Louis-area summers are hot and humid, winters cold enough for months of heavy furnace use. Metal ducts cycle between cooling-season condensation and heating-season dry airflow, and that swing promotes rust, mold, and dust buildup inside older runs.
Then there’s the detail technicians find in the blocks near the old Ferguson streetcar line and downtown: floor registers cut directly into the original hardwood, feeding shallow joist-space ducts that have held ash and debris since the neighborhood’s pre-war heating era. Cleaning those turns up coal-era soot you won’t find in a 1990s subdivision. Different houses, different work.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Main Ferguson Services
Most Ferguson calls come down to two jobs: a full system cleaning when the buildup has gone on long enough, and dryer vent cleaning when a load stops drying in one cycle.
Air Duct Cleaning in Ferguson
In a Ferguson home, a real cleaning means opening the system, not just vacuuming a register. Original sheet-metal runs often need the boots and trunk lines worked separately because there’s no flex duct to agitate. We use Rotobrush and Nikro extraction for the source removal, and Abatement Technologies HEPA containment keeps debris out of the living space while we work. In homes near downtown Ferguson with joist-space ducts, expect extra time for the fine soot and ash that settles deep. Every job gets before-and-after photos of your own ducts so you can see what came out. If the cleaning reveals a crack or a disconnected run, we can quote the repair rather than leaving you to find a second contractor. Start with Air Duct Cleaning in Ferguson.
Dryer Vent Cleaning in Ferguson
Older Ferguson homes often have dryer vents that run long distances through a basement or a shallow joist space before reaching the outside wall, and that length is where lint packs down. When a load takes two cycles to dry or the outside flap barely moves, the vent is usually restricted. Lint buildup in a dryer vent is a leading cause of residential house fires, which is why we treat this as its own job rather than an add-on. We clear the full run, check the transition behind the dryer, and confirm airflow at the exterior hood. Book Dryer Vent Cleaning in Ferguson when drying times creep up.
Air Duct Repair in Ferguson
Air duct repair in Ferguson is mostly a conversation about old metal. Homes built from the 1910s through the 1950s with original galvanized runs have usually had a modern furnace or air handler added at some point, and the duct system was never resized to match the new blower. Years of hot, humid summers and cold winters have also worked on those seams, so leaks, popped joints, and rusted sections are the common findings. Repair matters because a leaking duct in a Ferguson house doesn’t just waste air – it pulls attic or crawlspace air into the supply stream. We handle Air Duct Repair as a core service, which means a problem found during cleaning gets fixed on the same visit instead of sitting until someone else is booked out.
Ductwork Repair
Ductwork repair covers the existing system in place: sealing leaking joints, reconnecting runs that have come apart, patching rusted or crushed sections, and re-supporting sagging trunk line. In Ferguson’s older homes, the shallow joist-space runs are where the work tends to concentrate.
Signs you need it
Signs include rooms that never heat evenly, whistling or rattling at a register, visible dust streaks around a ceiling vent, and a furnace that runs longer than it should.
What it costs in Ferguson
Typical ductwork repair in Ferguson falls in the range shown in the table below, with the written estimate setting the final price.
How we do it
We inspect the accessible runs with the system running, mark every leak and disconnect, seal or reconnect each one, then verify airflow at the registers before we pack up.
Air Duct Replacement
Some Ferguson systems have reached the point where repair costs more than it saves. Sheet-metal ducts that have rusted through at the bottom of a joist space, or runs that were undersized decades ago and simply can’t carry the airflow a modern system needs, are replacement candidates.
Signs you need it
Signs include rust-through that keeps returning after repair, duct runs that crumble when touched, and a system that stays unbalanced no matter how many dampers get adjusted.
What it costs in Ferguson
Air duct replacement in Ferguson typically runs into the ranges below, depending on how many runs are replaced; the written estimate sets the final price.
How we do it
We map the existing layout, remove the failed sections, install new duct sized for the actual blower, then seal the joints and test airflow room by room.
What Air Duct Repair Costs in Ferguson
These are typical ranges for Ferguson, not a flat quote – the written estimate you get before work starts is the final price.
| Item | Typical range in Ferguson |
|---|---|
| Ductwork repair (sealing and reconnecting leaks) | $250 – $900 |
| Duct replacement (per run) | $350 – $1,200 |
| Full system duct replacement | $2,000 – $6,500 |
Do I need a permit to repair ductwork in Ferguson?
Duetwork repair that reseals or reconnects existing runs usually doesn’t require a permit, but replacing a system can, so ask the City of Ferguson’s building department before you schedule. We’ll tell you plainly what type of job yours is.
Can a duct repair really make a difference in an old Ferguson home?
Yes, especially in pre-war houses. Sealing leaking joints on original sheet-metal runs cuts the amount of attic and crawlspace air pulled into your supply stream and helps rooms heat evenly. Call (877) 349-6189 for an exact quote – estimates are free.
Brands We Service in Ferguson
We work with Honeywell and Aprilaire air-quality systems and use Abatement Technologies containment equipment on Ferguson jobs. We don’t stock parts on a truck or claim to carry every component, so if a replacement part is needed we source it and tell you the expected turnaround before you commit. See our brands for the full list we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Air Duct Cleaning Company in Ferguson, MO
| Service | Typical range in Ferguson |
|---|---|
| Air duct cleaning (whole system) | $350 – $700 |
| Ductwork repair (sealing and reconnecting leaks) | $250 – $900 |
| Duct replacement (per run) | $350 – $1,200 |
| Full system duct replacement | $2,000 – $6,500 |
What pushes price up in Ferguson is the age of the system: original sheet-metal runs with joist-space ducts take longer to open and clean than later flexible ductwork, and heavy soot or ash buildup adds time. One flat price per system is agreed before work starts, with no per-vent pricing, so the number in your written estimate is the number you pay.
Neighborhoods We Serve in Ferguson
We schedule duct work across Ferguson, including the blocks near the old streetcar line and the downtown core where original hardwood-floor registers and shallow joist-space ducts are common. Homes on the older streets closer to downtown tend to have the longest setups; the later infill and apartment conversions nearby usually go faster. One dispatch note covers the whole city: when you book, we give you a window rather than a per-neighborhood promise. Areas we work regularly include:
- Downtown Ferguson
- The blocks along the old streetcar line
- Older residential streets around the 63135 core
- Infill and apartment conversions on the city’s edges
Service Area – Cities Near Ferguson
Ferguson sits in the middle of a ring of older St. Louis County communities with similar pre-war housing, and we work them all. If you’re just outside Ferguson, we cover Jennings, MO, Florissant, MO, Overland, MO, and Bellefontaine Neighbors, MO. Same equipment, same approach: source removal first, then repair where it’s needed, then photos so you can see the result. When you call, tell us your city and we’ll confirm coverage and book a window.
Serving Ferguson, MO – Our Local Coverage Area
We serve Ferguson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning Company in Ferguson
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm, closed Saturday. A call outside dispatch hours gets booked into the next opening. We’ll confirm the soonest available window when you call (877) 349-6189 – estimates are free.
The city’s building department handles permit questions, and some HOAs have rules about exterior vents and equipment. We don’t guess at your HOA’s limits – check with them before scheduling, and we’ll work within whatever the written estimate scope allows.
Yes. We serve all of Ferguson, including the older streets near the old streetcar line and the downtown core where joist-space ducts and hardwood-floor registers are common. Tell us your cross streets when you call and we’ll confirm the booking.
Ready to get your Ferguson home’s ducts sorted? Call (877) 349-6189 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system agreed before work starts, before-and-after photos of your own ducts, and repair handled on the same visit where it’s needed.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ferguson Customers Say
"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Malik Bryant"Quoted per system rather than the bait and switch per vent pricing everybody else in town uses. The number I was told on the phone was the number on the invoice."
- Whitney Sutton"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Steve Norris